Crea 8 Display Plinth - 958x708

An attractive display plinth for use as a stand alone unit or as an integral part of a Crea 8 display system. Easily assembled and dismantled.

• Comprises two 958mm wide x 1000mm high front/rear panels, two 708mm wide x 1000mm high side panels, one plinth top, four plinth top supports, four 1000mm long octagonal poles and four pole end caps.
• Choice of loop nylon fabric covering colours on each panel face - please specify.
• Plinth top is available in a choice of black, white or grey laminate - please specify.
• Plinth top supports are available in either black or grey - please specify.
• Choice of pole colours - please specify.
• Choice of pole end cap colours - please specify. 
• Tough PVC round bases (see image for Crea 8 Six Panel Modular Display System) are available for height consistency for when the display plinth is being used as an integral part of a Crea 8 display system with bases. They can be 0.5kg lightweight (additional £9 per base) or 3kg weighted (additional £21 per base) and are available in a choice of black or grey - please specify.
• Pin striping in vacant slots on the poles gives added colour to your display plinth and is available for an additional £1.50 for an amount sufficient for one slot on all four poles - please specify.
• A lockable cupboard door can be provided in the front of the plinth for an additional £179. This would be supplied in place of the front panel - please specify, including your loop nylon colour choice for each face of the door.

Please note: When your display plinth is used as an integral part of your Crea 8 display system, the rear panel of the plinth is replaced by the same size panel on the display system. Likewise, the rear two poles of your display plinth are replaced by the poles of your display system.